User's Manual
Table Of Contents
- 1 Introduction
- 2 Product Description
- 3 Appendix I. Ancillary Devices – Antenna, Cable and other Passive Device
- 4 Human RF Exposure – Maximum Permissible Exposure Evaluation
Intelibs, Inc Proprietary and Confidential Page 22
22
2.7.1.1 Configuring FHU/SRU
If one of Bluetooth or Ethernet connection has been established, LMT is ready to start. Launch the Local
Management application by clicking the icon “Cherry” and follows the steps below.
Step 1
• Launch the application “Cherry”.
• Enter the password, click “Login”.
• Click “Connect” icon on the left top corner of window.
Step 2
• Select the connection parameters as follows:
- Repeater Types: VzW Dual Band Small Power INB System
- Connected Device: SRHU [Dual Band]
- Connections
o Serial Port: The port number established via Bluetooth or
o UDP: IP address for the Ethernet interface