User Guide

The recommended screw for xing the product is
18 × 3 mm.
Location of the screw
Location of the screw
8. Conguring the LED
through the center unit
keyboard
Using the keyboard of the AMT 8000 alarm center,
go into the programming mode with the master
password, then type the following command:
Enter + 66 + Zone + LED + Enter
000 = Off
010 = On
Zone in which the sensor is
registered, from 01 to 64
8.1. Information on LED operation
LED Off: with the LED off option marked, the TX 8000
will only light the LED for the rst 15 minutes after
battery insertion. Factory default.
LED on: with the LED on option, the TX 8000 will light
up the LED in all motion detection of the sensor with
wire connected to it.
8.2. Conguring the LED through the
application
After the application is properly connected to the
alarm center, select Congure center on the main
screen of the APP.
Menu
Congure Center >
Online >
Events >
After that, select sensors;
Settings
General >
Zones >
Passwords >
Communication >
Event codes >
IP monitoring >
Ethernet/Wi-Fi >
GPRS >
Programed activation/deactivation >
Sensors >
Once you have done this, select the sensor you wish
to congure, for example:
Sensor 1
Sensors
Sensor 1 >
Sensor 2 >
Sensor 3 >
Sensor 4 >
Sensor 5 >
Sensor 6 >
Sensor 7 >
Sensor 8 >
Sensor 9 >
...Sensor 64 >
After selecting the sensor, the following adjustment
screen will open.
For TX 8000, the sensitivity and operating mode
settings do not apply. LED conguration only.
Sensor 1
Sensitivity
Level 1
Level 2
Level 3
Level 4
LED
Always Off
On when triggered
Operation mode
Economy mode
Continuous mode
Discard changes
Save
Does not apply
Does not apply
Note: for conguring the settings, check the
sensitivity table, the explanations of LED operation
and the Operation mode in item
8.1. Information
on the sensor settings
9. Battery
Use only quality batteries with the correct sizing for
the device, and with the typical use of the device,
the battery life forecast is 3 to 5 years and can be
inuenced by the number of triggering, weather
conditions and conguration mode.
The battery model should be CR2450, being used
one (1) battery per transmitter.
This product has an internal battery/battery. After
its useful life, the product must be delivered to an
Intelbras authorized technical assistance or directly
perform the nal destination environmentally
appropriate avoiding environmental and health
impacts. If you prefer, the battery as well as other
Intelbras brand electronics without use, can be
disposed of at any collection point of Green Eletron
(manager of electrical and electronic waste with
which we are associated). If you have any questions
about the reverse logistics process, please contact us
at (48) 2106-0006 or 0800 704 2767 (Monday to
Friday from 8am to 8pm and Saturdays from 8am to 6
pm) or via [e-mail].
10. Homologation
05326-18-00160
This equipment is not entitled to protection
against harmful interference and may not cause
interference to duly authorized systems. This is a
product approved by Anatel, the approval number
can be found on the product label, for queries visit
the website: sistemas.anatel.gov.br/sch .
Warranty term
It is expressly stated that this contractual warranty is given
subject to the following conditions:
Name of customer:
Signature of the customer:
No. of the invoice:
Date of purchase:
Model: Serial No:
Reseller:
1. All parts and components of the product are under
warranty against possible manufacturing defects, which
may present, for a period of one (1) year, – comprising
90 (ninety) days of legal warranty and 9 (nine) months
of contractual warranty, –, counted from the date of
purchase of the product by the Consumer, as stated in the
invoice of purchase of the product, which is part of this
Term throughout the national territory. This contractual
warranty includes the express exchange of products that
are defective in manufacture. In case no manufacturing
defect is found, but aw(s) from inappropriate use, the
Consumer will bear these expenses.
2. Product installation must be done in accordance with
the Product Manual and/or Installation Guide. If your
product needs to be installed and congured by a
qualied technician, look for a suitable and specialized
professional, and the costs of these services are not
included in the value of the product.
3. If the defect is found, the Consumer should immediately
communicate with the nearest Authorized Service
listed by the manufacturer, – only they are authorized
to examine and remedy the defect during the warranty
period provided herein. If this is not respected, this
guarantee will lose its validity, as the violation of the
product will be characterized.
4. In the event that the Customer request home care,
he/she should refer to the nearest Authorized Service
for the technical visit fee. If the need for withdrawal
of the product is found, the expenses arising, such as
transportation and safety to and from the product, are
under the responsibility of the Consumer.
5. The warranty will totally lose its validity in the event
of any of the following: a) if the defect is not of
manufacture, but caused by the Consumer or by third
parties alien to the manufacturer; b) if the damage to
the product comes from accidents, claims, agents of
nature (lightning, oods, landslides, etc.. ), humidity,
mains voltage (overvoltage caused by accidents or
excessive mains uctuations), installation/use in
disagreement with the user manual or due to natural
wear of parts and components; c) if the product has
been inuenced by chemical, electromagnetic, electrical
or animal (insects, etc.); d) if the product’s serial number
has been tampered with or erased; e) if the device has
been violated.
6. This warranty does not cover loss of data, so it is
recommended that the Consumer make a regular
backup of the data on the product.
7. Intelbras is not responsible for the installation of
this product and also for any attempts of fraud and/
or sabotage on its products. Keep software and
application updates, if any, up to date, as well as
network protections necessary to protect against
hackers. The equipment is guaranteed against aws
within its normal conditions of use, and it is important
to be aware that, since it is an electronic equipment, it is
not free from frauds and scams that may interfere with
its correct functioning.
Since these are the conditions of this complementary Warranty
Term, Intelbras S/A reserves the right to change the general,
technical and aesthetic characteristics of its products without
prior notice.
All images in this manual are illustrative.
01.22
Made in Brazil
Customer Support: (48) 2106 0006
Forum: forum.intelbras.com.br
Support via chat: chat.intelbras.com.br
Support via e-mail: [e-mail]
Customer Service: 0800 7042767
Where to buy? Who installs it? 0800 7245115
Produced by: Intelbras S/A – Indústria de Telecomunicação
Eletrônica Brasileira – Rodovia BR 459, km 124, nº 1325
Distrito Industrial Santa Rita do Sapucaí/MG – 37540-000
CNPJ 82.901.000/0016-03 – www.intelbras.com.br