User Guide

63
Jumper open Long line (high sensibility)
Jumper position 1-2 Medium lines
Jumper position 2-3 Short lines (low sinsibility)
Adjust the position of J3A/B and J4A/B of the trunk board for “IDA” (see installing
the lines).
Incoming call will be shown as follows:
Line Extens Number Time Duration Date
E04 28 0482472600 13:15:10 00:12:30 10/01/97
E01 22 2472600 13:19:30 00:01:20 10/01/97
Observation:
- Some old public switches do not sent the caller identification, in this case
number such as 0111111..., 0444444..., 11111..., 44444...could be displayed
and which does not refer to na equipment defect.
4.3.10 Voice Mail
Characteristics :
- Automatic system that prompts for new incoming calls and call the extension or
external number programmed to send the messages;
- Remote access to the voice mail system to access the messages;
- Access through a 4 digit password;
- Auto-attendant.
To install :
- Connect the output RA/RB of the selected analog extensions to channel 1 and 2
of the voice mail system as follows :
Connector CN28 of PABX Connector CN2 of voice mail
TXDA RX
GND GND