User Guide

62
Note :
- You must program the access category of the extension to the paging system;
- Program the numbering plan – you must set the physical extension07 as pager.
To install :
- Connect the pager board to CN25 as per the figure :
4.3.9 Caller ID (IDA)
To install:
- Caller ID service must be activated by your local telephone service provider.
- Install the caller ID board to CN19 (line 1 to 10) and CN20 (line 11 to 16) as per
the figure :
for MFP signaling, adjust the jumper position J1 of each circuit of the caller ID board
as per the diagram :