User Guide

61
4.3.7 Station Call Billing
Through a serial port, you can use Intelbras billing software to bill and monitor all
outgoing an incoming calls.
Para instalar
:
- First install intelbras programming software
- Install the billing software;
- Connect the serial port of the PC to CN29 as follows :
CN29
of PABX
DB25
Of PC
DB9
Of PC
TXDA Pin 3 Pin 2
RXDA Pin 2 Pin 3
GND Pin 7 Pin 5
4.3.7.1 Call Report and Billing with Polarity Inversion
The PABX can immediately identify an extablished call using polarity inversion. This
will allow the PABX to start billing the call only when extablished.
- The trunk board with polarity inversion is required.
4.3.8 Paging System
You can connect the PABX to a sound system and any extension set to access the
paging system can broadcast messages or annouce parked calls.
The pager uses the 8
th
physical position (207) of the 1st extension board and
therefore, this position cannot be used as an extension when the pager board is
installed.