User Guide

6
Flash 88 generate a flash in the line and pressing flash is not required after the
CSP code;
−
See Accessing CSP facilities and call transfer to another PABX in the
programming manual on how to program this facility.
1.2.16 External Call using Password
Using the password allows the PABX to identify the category of the extension to
which the password belongs.
The category of your extension is linked to various characteristics defined in
Extensions
Category in the programming manaul
.
Through route 0
☞
 
+
PASSWORD AND YOUR EXTENSION Nº
, wait for line tone
+
EXTERNAL Nº
.
Example
: Extension 221 with password 35 is set to make long distance calls and
the user wants to make external calls to 51 3456789 through route 0 from another
extension with toll restriction. press
60
+
35
+
221
, wait for line tone and press
513456789
.
Through special route
☞

+
ROUTE -
1 to 7
+ PASSWORD and YOUR EXTENSION Nº
, wait for line tone
+
EXTERNAL Nº
Important
:
−
External line recall is not allowed.
1.2.17 Accessing the Voice Mail (requires Intelbras voice mail )
☞
 
, wait for the message prmpt.
Important
:
−
the extension must have access category programmed (see access category to
voice mail in the programming manual
)
;
−
the physical position of the voice mail must be programmed
(see numbering plan
in the programming manual)
.
1.2.18 Accessing the Paging service
You PABX can be connected to a speaker´s system to annouce parked calls or
transmit messages.
☞
 
, you system is now connected to the speker´s system.
Important
:
−
the physical position of the paging system must be programmed (see numbering
plan in the programming manual);
−
Access category of the extension to have access must also be programmed (see
External call category through special route in the programming
manual)
.