User Guide

41
3.7 PROGRAMMABLE EXTERNAL AUTO-ACTIVATION
( external activation interface required)
You can automatically command up to external devices in predetrmined hours.
weekdays and holidays should be programmed together.
Once in programming mode, do the following :
External Auto-activation 1
To set the time
☞
 
+
HOUR
and
MINUTE
,
w
ait for tone or confirmation prompt.
Disactivate
☞
 
,
w
ait for tone or confirmation prompt.
Activate every day
☞
  
,
w
ait for tone or confirmation prompt..
Activate weekdays
☞
  
,
w
ait for tone or confirmation prompt..
Disactivate external auto-activation 1
☞
  
,
w
ait for tone or confirmation prompt.
Example
: you want to set external auto-activation 1 to activate a bell during
weekdays at 12:00 : press
84
+
1200 + 812.
External Auto-activation 2
To set the time
☞
 
+
HOUR and MINUTE
,
w
ait for tone or confirmation prompt.
Disactivate
☞
 
,
w
ait for tone or confirmation prompt.
Activate every day
☞
  
,
w
ait for tone or confirmation prompt.
Activate weekdays
☞
  
,
w
ait for tone or confirmation prompt.
Disactivate external auto-activation 2
☞
  
,
w
ait for tone or confirmation prompt.
Important
:
−
you can set up to 24 different times, as per the activation order;
−
Hour and minutes should have two digits; the hour should be set between 00/23.
Factory setting
: auto-activation disactivated.