User Guide

40
3.6 REMOTE PROGRAMMING VIA AN MF TELEPHONE
You can program the following functions :
- Calendar; - Call return;
- Extensions category; - Incoming Call loggin;
- Configuration of lines; - Outgoing Call Logging;
- Cancelling functions; - Block call logging – full buffer
- Call conference;
See how you can configure your PABX remotely :
After the message prompt
☞

+
MAIN PASSWORD
- 3 digits
+
CODE OF DESIRED ONFIGURATION
+

•
Continuous MF tone : operation correct;
•
MF tone ith pause : incorrect operation.
Example
: you want to remotely set your PABX to release call logging and enable
call conference, assuming that 456 is your main password.
•
After calling your PABX, wait for the auto-attendant prompt;
•
press
#
+
456
+
211
+
#
(to enable call logging);
•
wait for correct programming tone;
•
press
261
+
#
( to enable call conference);
•
wait for correct programming tone and hangup
Important
:
−
you can note that both configuration can be carried out in sequence.
Follow the below instruction if your call is transferred to main extension
(programmer) by the operator. PABX password is not required. See item
Transferring to remote cpnfiguration//Configuration via PC in the operation manual.
After being transferred by the operator
☞
CODE OF DESIRED CONFIGURATION
+

•
Continuous MF tone : operation correct;
•
MF tone ith pause : incorrect operation.
Example 2
: you want to remotely alter the access category of extension 222 from 3
to 5 :
•
call the PABX and request to be transferered to the main extension
(programmer);;
•
press # + 371 + 5 + 22 + # ( to enable call logging);
•
wait for correct programming tone and hangup.
Important
:
- You must alter you PABX default password for remote programming;