User Guide

36
3.3.1.2 DISA P/T ( pulse / tone )
DC or MF PHONE
☞
you receive 3 beeps when the PABX answers your call ”, select one of the below options.
•
EXTENSION Nº
;
•

+
GROUP
1 to 8
;
•
 
or
 
, to enable external activation 1 or 2
;
•
 
, for voice mail
;

+
MAIN PASSWORD
+
CODE OF DESIRED CONFIGURATION,
for remote programming
.
Important
:
−
the main apssword should be altered before attempting remote programming
(see
1.2 )
.
Factory setting :
auto-attendant disactivated.
3.3.1.3 Auto-attednant features
Your DISA board has various features that can be accessed from the main
extension (programmer) without entering in programmin mode.
DISA P/T or T
TIME :
after the message, the PABX, waits sometime to receive the extension
number for direct access.
Activate time for daymode message
☞
    
,
w
ait for tone or confirmation prompt.
Disactivate
☞
    
,
w
ait for tone or confirmation prompt.
Activate time for nightmode message
☞
    
,
w
ait for tone or confirmation prompt.
Disactivate
☞
    
,
w
ait for tone or confirmation prompt.
MENU
: The configuration is necessary for the PABX to prompt for menu options
(requires message recording )
.
Activate menu
☞
    
,
w
ait for tone or confirmation prompt.