User Guide

34
Serial
☞
  
, w
ait for tone or confirmation prompt.
3.2.4 Clearing Call Logging – Total PABX reset
☞
 
, w
ait for tone or confirmation prompt.
Important
:
−
All buffer will be reset.
Factory setting :
outgoing call loging with parallel printer.
3.2.5 Polarity Inversion
Polarity inversion allows the PABX to start biling a call when it is being answered.
(seeitem 4.3.7 ).
Line
: 01 to 16;
99 for all the lines.
Once in programming mode, do the following :
☞

+
LINE
+
  
, w
ait for tone or confirmation prompt.
Disactivate
☞

+
LINE
+

+
TIME TO START CALL LOGGING
- 05 to 45 seconds,
w
ait for tone or
confirmation prompt.
Example
: for line 1 to use polarity inversion, press
4
+
01
+
700
.
Important
:
−
You must request polarity inversion feature to be activated by your local carriera.
Factory setting
: disactivated.
3.3 AUTO-ATTENDANT
You can set your PABX to forward incoming calls to the destination extension
without going through the operator.
Line
: 01 to 16;
99 for all the lines.
Once in programming mode, do the following :
Block auto-attendant
☞

+
LINE
+
  
, w
ait for tone or confirmation prompt.