User Guide

31
Disactivate
☞
 
,
w
ait for tone or confirmation prompt.
Example:
you want the external number 2819500 through
0
, to answer calls from
doorphone 1 : press
5300
+
0
+
2819500
.
Doorphone 2
☞
   
+
ROUTE
( 0 to 7)
+
EXTERNAL Nº ,
w
ait for tone or confirmation prompt.
Disactivate
☞
 
,
w
ait for tone or confirmation prompt.
Examplo:
you want the external number 2819500 through
0
, to answer calls from
doorphone 1 : press
5400
+
0
+
2819500
.
Important
:
−
Maximum conversation time = 90 seconds;
−
The IP 700 is required to establish the communication;
−
The external number as attendant uses an external activation command of
PABX;
−
You cannot activate the doorphone lock from the external number;
−
You need to activate the external attendant of the doorphone
(see item 3.1.6)
.
Factory setting
: no external number programmed.
3.1.6 Activate Doorphone Attendant
You can activate an external number, extension or group as doorphone. These
numbers must be preprogrammed.
The configuration is done from the main extension (programmer) without
entering the programming mode, just lift the handset and enter the
command.
See items 3.1.4 and 3.1.5 on how to program the type of doorphone attendant.
Doorphone 1
Extension or group
☞
   
, w
ait for tone or confirmation prompt.
External Number
☞
   
, w
ait for tone or confirmation prompt.
Example:
you set na extension and an external number as attendant for
doorphone 1. Press
1172
to activate the external number,
1171
to activate the
extension.
Doorphone 2
Extension or group
☞
   
, w
ait for tone or confirmation prompt.