User Guide

Capítulo II
28
Important:
−
The fax emissor must be in automatic mode for the PABX to identify the type of
call.
Factory setting : fax ID disactivated .
2.20 AREA CODE
This feature is necessary to identify incoming calls using the Ti 630i/TI730i. You should
not enter the zero (0) when programming this function
Once in programming mode, do the following :
☞
 
+
A
REA CODE
(place of PABX ),
w
ait for tone or confirmation prompt.
Disactivate
☞
 
,
w
ait for tone or confirmation prompt.
Example: sif the area code of your geographical region is 048, press 73 + 48.
Factory setting : no prefix programmed.