User Guide

23
2.9 ACCESSING CSP FACILITIES AND CALL TRANSFER TO
OTHER PABX
Once in programming mode, do the following :
Activating access
☞
  
,
w
ait for tone or confirmation prompt.
Disactivating access
☞
  
,
w
ait for tone or confirmation prompt.
Factory setting
: access disabled.
2.10 HOLIDAYS
You can set up to 16 different holidays for various facilities such as auto-nightmode,
auto-activation et alarm.
Once in programming mode, do the following :
☞
  
+
DAY
- 01 to 31
+
MONTH
- 01 to 12 (corresponding to each holiday),
w
ait for tone
or confirmation prompt.
Example
: to program holiday on 1º may, press
152
+
01
+
05
.
disactivate
☞
  
,
w
ait for tone or confirmation prompt.
Important
:
−
When disactivating the feature all previous configurations will be lost;
−
Week-ends don’t have to be included unless a public holiday coincides with a
Saturday when carrying out 2.10.1 .
Factory setting
: no holiday programmed.
2.10.1 Programming time of week-end
You can set the time when week end starts. Useful when companies work half day
on Saturday.
☞
 
+
HOUR and MINUTE
,
w
ait for tone or confirmation prompt.
Example
: you want Saturday to start at 12:00, press
17
+
1200
.
Factory setting
: all Saturdays set as holiday.