User Guide

3
1.2.5 Held Calls
The time to keep a call on hold can be programmed as per your requirements. ( see
item 2.10.1 in chapter II).
Decadic phone (Pulse)
☞
 
MF phone (Tone)
☞
 
Importante
:
−
Beeps are emitted when the programmed time is over. You can put the phone on-
hook to return to the first call;
−
If the second call is terminated before the time is over, you can capture the first
call by pressing 569,
(see item 1.6.4 )
.
1.2.6 Making a Call through a Specific Line
Line
: 01 to 16
99 for all the lines.
☞
 
+ LINE Nº .
Important
:
−
This facility is linked to the external access type (route 0 or special) and you
extension category (local, regional, DDD or IDD);
−
Busy line recall is not allowed.
1.2.7 External Call through Special Route
The Extension must have an access category programmed (see Category for
external call through special route in the programming manual).
☞
 
+ ROUTE Nº
- 1 to 7, wait for line dial tone
+
EXTERNAL Nº
.
1.2.8 External Call using Private Code
The extension should have the private code registered, have a category to access
route 0 and a password for private code. The code will be indicated on call reports
to identify the person accessing external numbers.
☞
 
+ PRIVTE CODE
- 00 to 99
+ PRIVATE PASSWORD
- 4 digits, wit for line tone
+
EXTERNAL Nº
.
Important
:
−
to program a password and private code see item 2.5 in Chapter II and Extension
Private Code in the programming manual);
−
no other operation may be executed during this type of calls;
−
such access can be used even if the extension has toll restriction activated.