User Guide

Capítulo II
20
2.5.4 Time for External Activation 1
Once in programming mode, do the following :
☞
 
+
TIME
- 00 to 20 seconds,
w
ait for tone or confirmation prompt.
Factory setting
: 4 seconds.
2.5.5 Time for External Activation 2
Once in programming mode, do the following :
☞
 
+
TIME
- 00 to 20 seconds,
w
ait for tone or confirmation prompt.
Important
:
−
This is the maximum command time of the external activation;
−
Set the time to 00, if you want to leave the commad time open;
−
The command can be disactivated before the programmed time by pressing akey or
flash.
Factory setting :
4 seconds.
2.5.6 Number of attempts for external recall
Once in programming mode, do the following :
☞
 
+
ATTEMPTS
- 1 to 9,
w
ait for tone or confirmation prompt.
Factory setting
: 9 attempts.
2.5.7 Time between attempts
Once in programming mode, do the following :
☞
 
+
TIME
- 1 to 9 minutes,
w
ait for tone or confirmation prompt.
Factory setting
: 1 minute.
2.5.8 Activation Time for Doorphone 1
Once in programming mode, do the following :
☞
 
+
TIME
- 1 to 5 seconds,
w
ait for tone or confirmation prompt..
Factory setting
: 1 second.
2.5.9 Activation Time for Doorphone 2
Once in programming mode, do the following :
☞
 
+
TIME
- 1 to 5 seconds,
w
ait for tone or confirmation prompt.
Factory setting
: 1 second.