User Guide

Capítulo II
16
Once in programming mode, do the following :
Collective directory for general use
☞
 
+
DIRECTORY Nº
- 20 to 99
+
ROUTE
- 0 to 7
+
EXTERNAL Nº
, wait for tone or
confirmation prompt.
Collective directory for restricted use
☞
 
+
DIRECTORY Nº
- 20 to 99
+
ROUTE
- 0 to 7
+
EXTERNAL Nº
, wait for tone or
confirmation prompt.
disactivate
Collective directory for general or restricted use
☞
 
+
DIRECTORY Nº
- 20 to 99, wait for tone or confirmation prompt.
Factory settings : no number programmed.
2.2 INDIVIDUAL TELEPHONE DIRECTORY
You can set 10 extensions with 10 individual telephone directories offered by the
PABX, since individual directories can be for access as per extension category or
restricted use.
Up to 10 number with up to 20 digits can be programmed in each directory. The
stored position of the numbers will be between 10 to 19.
Note : othe extension can only receive one of the types of individual directories as
follows :
2.2.1 Access as per Extension Category
This type of directroy allows the proper extension with access to program the
telephone. The stored numbers should respect the type of access allowed to the
extension for external calls (local, regional, DDD or IDD).
Once in programming mode, do the following :
Extension with access to directory as per category
☞
  
+
DIRECTORY Nº
- 0 to 9
+ EXTENSION
, wait for tone or confirmation prompt.
2.2.2 Restricted Use
Only the main extension ( programmer ) can program the telephone numbers to be
accessed by the extensions.
Once in programming mode, do the following :
Extension to access directory for restricted use
☞
  
+
DIRECTORY Nº
- 0 to 9
+
EXTENSION
, wait for tone or confirmation prompt.