User Guide

15
Drop the call after TTD
EOnce in programming mode, do the following :
☞☞

+
LINE
+

+
TIME
- 06 to 90 (30 to 450 seconds), wait for tone or confirmation prompt..
Important
:
−
if accessing the line, you answer a call with this configuration activated, you must
transfer
the call before before the programmed time to avoid losing it.
Transferring the call
DC PHONE
☞
  
, wait for 7 seconds
+
EXTENSION Nº.
MF PHONE
☞
  
, wait for 7 seconds
+ +
EXTENSION Nº
Factory setting
: time not programmed.
1.6.12 Identifying Incoming Calls
You can set the number of rings the PABX receives from a call before transferring it
to the main extension (operator).
Line
: 01 to 16;
99 for all the lines.
Once in programming mode, do the following :
☞

+
LINE
+
 
+
Nº OF RINGS
- 0 or 1, wait for tone or confirmation prompt.
Factory setting
: zero (0) .
2 OTHER CONFIGURATIONS
2.1 COLLECTIVE TELEPHONE DIRECTORY
You can create collective directory for the extensions that stores up to 80 numbers
stored from 20 to 99, with a maximum of
20 digits
for each.
The directory can be for general or restricted use or both.
-
General use
: available for all the extensions, provided they have external access
category (local, regional, DDD or IDD) to complete the call.
-
Restricted use
: available to extensions with access category for restricted use.