User Guide

13
1.6.9 Prefix Table
You block or release some prefixes for determined extensions categories.
Once in programming mode, do the following :
All prefixes at the same time
☞
 
+
CATEGORY
, wait for tone or confirmation prompt.
A specific prefix
☞

+
CATEGORY
+
PREFIX
,
wait for tone or confirmation prompt
.
CATEGORY
:
6 Release prefixes for extension with category local, regional, DDD and IDD;
7 Release prefixes for extension with category, regional, DDD and IDD;
8 Release prefixes for extension with category DDD and IDD;
9 Release prefixes for extension with category IDD;
0 block all prefixes for all extensions.
Prefixes
: can have up to 6 dígits.
You can set the prefixes as follows :
23 prefixes with 3 digits;
11 prefixes with 4 digits;
07 prefixes with 5 digits;
05 prefixes with 6 digits.
Example 1
: To release all prefixes for DDD, press
55
+
8
. All prefixes for will be
blocked for local and long distance access.
Example 2
: To block 0900, press
5
+
0
+
0900
.
Example 3
: You want extensions with local category to only have access to
prefixes 33 & 34, and the other extensions to have access as per the configuration
in external access category, do the following :
1º
: press
55 + 7
to block extension local access, releasing access for extension
with category regional, DDD and IDD to all prefixes. With such configuration, the
prefixes DDD and IDD will be available for extensions with category regional.
However, you should only release the prefix DDD for extensions with category
DDD pressing
5
+
8
+
0
, and release prefixes IDD only for extensions with IDD
category pressing
5
+
9
+
00
;
2º
: finally, press
5
+
6
+
33
( to release prefix 33) and
5
+
6
+
34
( to release prefix
34). This way, only prefixes 33 and 34 will be released for extensions with local
category.
Example 4
: to block access to prefix 048, press
5
+
0
+
048
. when the caller dials
0
+ CARRIER´S CODE +
48
the PABX blocks the call.
Important
:
−
for teh PABX to analyse the table, you need to check the configuration “ releasing
or analising of prefix“;
−
The Carrier´s code is not analised in the prefix table.