User Guide

Capítulo II
12
}
1.6.7 Collect Call Barring
Define if the PABX accepts or rejects collect calls during day or nightmode.
Line
: 01 to 16;
99 for all the lines.
Once in programming mode, do the following :
Release collect calls
Daymode
☞

+
LINE
+
  
,
wait for tone or confirmation prompt.
Nightmode
☞

+
LINE
+
  
,
wait for tone or confirmation prompt.
Block collect calls
Daymode
☞

+
LINE
+
  
,
wait for tone or confirmation prompt.
Nightmode
☞

+
LINE
+
  
,
wait for tone or confirmation prompt.
Example
: You want to block collect calls to all lines in nightmode, press
4
+
99
+
831
.
Factory setting :
collect calls allowed for day and nightmode.
1.6.8 Analysing the Number of Local Digits
The PABX can analyse or not the number of digits entred when dialing an external
number.
IDD
(international)
20 digits
DDD
(long distance)
13 digit
s
DDC
(collect call)
14 digits
.
LOCAL
( local)
7, 8 or 9 digits
, as per the below configuration :
Line
: 01 to 16;
99 for all the lines.
Once in programming mode, do the following :
PABX does not analyse the digits
☞

+
LINE
+
  
, wait for tone or confirmation prompt.
PABX analises digits for DDI, DDD, DDC and local
☞

+
LINE
+
 
+
Nº OF LOCAL DIGITS
- 7 to 9, wait for tone or confirmation prompt.
Example
: if the PABX is connected as sub-system and requires the releasing of the
dialed digits, press
4
+
99
+
908
.
Factory setting
: analises up to 8 digits.