User Guide

9
Incoming and outgoing decadic calls
☞
 
+
LINE
+
ROUTE
+

,
wait for tone or confirmation prompt.
Incoming and outgoing MF calls
☞
 
+
LINE
+
ROUTE
+

,
wait for tone or confirmation prompt a.
Transfroming a line into internal path
☞
 
+
LINE
+
 
,
wait for tone or confirmation prompt.
Blocking a line - no incoming or outgoing calls
☞
 
+
LINE
+
 
,
wait for tone or confirmation prompt.
Important
:
−
To re-enable a blocked line, you must configure the selected line again. If the line
uses both decadic and MF, the trunk must be set as MF;
−
Lines set as special routes (1 to 7) and route 0 will only be accessed by the
extensions peogrammed to access these routes
( see 1.5.2 and 1.5.3 in this
manual).
Example
: you want line 1 to be set as route 0 to make and receive decadic calls,
press
31
+
01
+
0
+
4
.
factory setting
: calls through Route 0 in MF mode.
1.6.2 Line Attendant ( extension or group )
Line
: 01 to 16;
99 for all the lines.
Once in programming mode, do the following :
Extension
☞

+
LINE
+

+
EXTENSION Nº
,
wait for tone or confirmation prompt.
Group
☞

+
LINE
+

+

+
GROUP Nº
- 1 to 8, wait for tone or confirmation prompt.
Example 1
: All incoming calls through line 10 to be answered by extension 25, press
4
+
10
+
1
+
235
.