User Guide

Capítulo II
2
}
To program the time
☞
 
+
HOUR
+
MINUTE
+
SECOND
, wait for tone or confirmation prompt.
Example
: to set the time as 7:15 , press
14
+
071500
.
Important
: date (day, month and year) and time (hour, minute and second) must be
set with 2 digits.
1.4 EXTENSION NUMBERING PLAN
This is a table that associates the extension number with its physical position.
Extension numbering can be :
from 200 to 263 or
2...
(0 to 999).
Physical position
: 00 to 63.
See below how to associate extensions with the physical position :
Enter in programming mode :
Extension
☞
 
+
PHYSICAL POSITION
+
EXTENSION Nº
, wait for tone or confirmation prompt
Voice Mail
☞
 
+
PHYSICAL POSITION
+
 
,
wait for tone or confirmation prompt
Pager
☞
     
,
wait for tone or confirmation prompt.
To cancel
☞
   
,
wait for tone or confirmation prompt
Important
: Physical position 00 cannot be programmed as voice mail.
Exemple
: if your extension 201 is associated to position 01 and extension 222 to
22, and want to invert the position, do the following :
1º
: release extension 222 from the physical position 22 to assign it another
position, press
51
+
22
+
a non existant number
;
2º
: press
51
+
01
+
222
, setting position 01 for extension 222;
3º
: press
51
+
22
+
201
, setting position 22 for extension 201. Now extension 201
and 222 are associated respectivaly to position 22 and 01.
Default settings
: Extensions : 200 to 263 – Physical position: 00 to 63.
1.5 EXTENSIONS CATEGORY
You can define various categories for your extension as per the necessities and the
operating modes of your PABX ( daymode, nightmode or both ) :