User Guide

1
1 PROGRAMMING STEPS
1.1 ENTERING IN MAIN PROGRAMMING MODE
From main extension (programmer )
:
press
 
+
  
;
once in programming mode be careful to enter the right digits
otherwise the PABX will not accept the instructions;
you can carry out any configuration while the PABX receives the
following prompts :
Ready to program signal: tcontinuous tone followed by short interval
similar to the internal tone;
Correct programming tone: slow beep sequence;
Incorrect programming tone: fast beep sequence;
to exit programming mode, put the phone on the hook.
Important: The main extension ( programmer ) uses physical position 00 and is
preset as extension 200. The number can be altered but the physical position
remains unchanged.
1.2 ALTERING THEMAIN PASSWORD
☞
 
+
CURRENT PASSWORD
+
NEW PASSWORD (3 digits),
wait for tone or
confirmation prompt.
Important: When the password is altered, the PABX release remote programming
automatically.
Defaut password : 123.
1.3 CALENDAR
The PABX calendar is required for some functions such as billing and alarm.
☞

+
DAY
+
MONTH
+
YEAR
+
DAY OF WEEK
(1 digit),
wait for tone or confirmation
prompt.
1
Sunday -
2
Monday -
3
Tuesday -
4
Wednesday -
5
Thursday -
6
Friday -
7
Saturday.
Example: to set the day as September 24 2004, Friday, press 1 + 240904 + 6.