User Guide

26
Line recall.
☞
  
+
TIME
- 3 to 6 seconds, wait for tone or confirmation prompt.
Disactivate
Extension recall
☞
   
,
wait for tone or confirmation prompt.
Line recall
☞
   
,
wait for tone or confirmation prompt.
Factory Setting
: 3 seconds.
2.10.3 Time of FLASH
You set various value for the FLASH when using various MF telephones.
☞
  
+
FLASH
- 2 to 9 (200 - 900 ms), wait for tone or confirmation prompt.
Important
:
−
If the time of Flash is over an no number is entered, the PABX will interpret it a
call disconnection and the extension is available to make a new call.
Factory setting
: 400 milliseconds.
2.11 NIGHTMODE SERVICE
Function is programmed from the main extension for incoming calls to be answered
only by extensions or groups defined as nightmode.
☞
  
,
wait for tone or confirmation prompt.
Disactivate
☞
  
,
wait for tone or confirmation prompt.
Important
:
−
Once nightmode is programmed, the extensions will return to their nightmode
catagories previously defined
(see Extensions Category in the programming
manual)
;
−
Once nightmode is disactivated, incoming calls are again answered by the
operator and the extensions will return to their normal categories as in daymode.