User Guide

15
☞
+
PARKING Nº
- 1 to 7, wait for dial tone and put the phone on-hook.
MF Phone
☞
+
PARKING Nº
- 1 to 7, wait for dial tone and put the phone on-hook.
Remove from Parking
☞
+
PARKING Nº
- 1 to 7.
Importante
:
−
If a call is parked for over 3 minutes it returns to the original extension.
1.9.2 Call Intrusion
You can break into an internal or external communication and transfer an external
call the extension that you have intrudded by putting the phone on-hook.
☞ over the busy tone, press
,
wait for 5 seconds to talk
• the destination extension receives beeps as an indication of call intrusion;
• beeps are emitted during conversation.
To cancel
DC Phone MF Phone
☞ ☞
Importante
:
−
The extension must have a category to use this facility and could also be
protected from call intrusion
( see Access Category to Call Intrusion in the
programming manual)
;
1.9.3 Emergency Call
You can program an external device or an extension to be activated during an
emergency situation.
See Emergency Call in the proramming manual
Using the Extension
☞
Lift the extension´s handset, wait for 7 seconds, the PABX will automatically dial th eprogrammed
number.
Using the External Device
☞
once the external device is activated, the PABX will automatically make the call.
Maximum conversation time is set to 60 seconds with beeps indicating the emegency call.
Important
:
−
Up to 30 attempts will be made if the external number is busy or does not answer;
−
To cancel the call made using the external device, carry out the facility
1.9.3.1
;
−
If you receive a busy tone while activating the internal emergency number,
through the extension, The PABX will keep sending 10 beeps, followed by a 5
second pause, to the extension until the programmed extension to receive the
emrgency call disconnect the ongoing call.