User Guide
Care and Safety
» Follow all instructions in the manual to install and handle the product.
» Install in environments not susceptible to factors such as rain, fog and water splashes.
» Wireless communication technology, when exposed to environments with high power radiation, may suffer interference
and and have its performance impaired. Example: locations near TV towers, AM/FM radio stations, amateur radio sta-
tions, etc.
» Do not install the alarm center and its accessories near radio frequency equipment such as routers, repeaters, and/or
Wi-Fi signal ampliers. The center and its devices must maintain a minimum distance of 2 meters from this equipment.
» Do not install the alarm center in front of air conditioning or heating equipment.
» Do not expose to direct sunlight.
» Clean only the outside of the device, using a damp cloth (do not use chemical solvents).
» Do not subject the device to excessive pressure or shock/drops.
» Check that at the installation site, the LED indicator of the devices ashes green when activated.
» Avoid installation on metallic surfaces so as not to weaken the transmission signal between the system’s devices.
» The installation and conguration of the center and the other products that make up this system must be performed by
a qualied professional.
» Perform periodic tests on it, in order to validate weather conditions, battery level and other factors, so that the site
monitored by the system is always in proper operating condition.
» LGPD - General Personal Data Protection Act: Intelbras does not access, transfer, collect or otherwise process any perso-
nal data from this product.