User Guide
26
3.13. Failure delivery time
AC failure
Enter + 481 + TM + Enter.
TM = failure delivery time from 01 to 99 minutes.
3.14. System reset
Reset of the whole system, except for the registration of wireless devices.
Enter + 0000 + Enter.
3.15. Reset of the whole system
Programming, messages and wireless devices
Enter + 9999 + Enter
.
3.16. Temporary reset of master and installer passwords
If you forgot the master password or the installer password, a temporary reset of these passwords is available by following
this step:
1. With the center powered on, press the registration key on the wireless device for approximately 15 seconds, when the
LED ashes the center will go into temporary reset mode for 1 minute. During this time the master password will return
to
1234
and the installer password will be
9090.
During this period it will be possible to enter programming mode and change the master password and/or installer
password. If nothing is done during this period, the passwords will revert to the same values previously programmed.
Note: the reset lock function must be disabled.
4. Homologation
This product has undergone the tests and certications required by the Brazilian telecommunications equipment regulatory
agency (Anatel), whose approval and results are available with the following certication.
05326-18-00160
This equipment is not entitled to protection against harmful interference and may not cause interference in duly authorized
systems.
This is a product homologated by Anatel, the homologation number is on the product label, for further information please
access the site:
sistemas.anatel.gov.br/sch
.