User Guide
24
» To set up Contact-ID code for restore type system events, type:
Enter + 914 + II + Enter
II = system event index from 00 to 26
Opening type events
System events
Index Internal event Default code
00 Wireless device low battery restoration 384
01 N/A N/A
02 Restoration of supervision failure 147
03 Zone bypass restoration 570
05 AC network restoration 301
06 Low system battery restoration 302
07 Battery restoration 311
08 N/A N/A
09 Remote activation 404
10 Automatic activation 403
11 One key activation 408
12 Activation under duress 121
13 N/A N/A
14 N/A N/A
15 N/A N/A
16 N/A N/A
17 N/A N/A
18 N/A N/A
19 N/A N/A
20 N/A N/A
21 N/A N/A
22 Tamper of expander devices 145
23 Sensor Tamper 383
24 N/A N/A
25 AC failure of the wireless device 342
26 PGM actuation 422
Push event code conguration
Enter + 92 + EV + Enter + Select event + Enter.
EV = group of events from 0 to 3, where group 0 is from 01 to 10 and so on up to group 3, which is from 31 to 35.
Event group (EV) Event Key Default value
0
ARM_DISARM_USER, Tecla 1 Enabled
N/A Tecla 2 Enabled
TRIGGER_ZONE, Tecla 3 Enabled
TRIGGER_24H, Tecla 4 Enabled
SILENT_TRIGGER, Tecla 5 Enabled
MEDICAL_EMERGENCY_TRIGGER, Tecla 6 Enabled
FIRE_TRIGGER, Tecla 7 Enabled
AUDIBLE_PANIC_TRIGGER, Tecla 8 Enabled
SILENT_PANIC_TRIGGER, Tecla 9 Enabled
TAMPER_SENSOR, Tecla 10 Enabled