User Guide

23
» Enable/Disable Contact-ID code for zone restore type events
Enter + 911 + ZZ + Enter
ZZ = zone from 01 to 64
» Enable/Disable Contact-ID code for tamper-open type events
Enter + 902 + ZZ + Enter
ZZ = zone from 01 to 64
» Enable/Disable Contact-ID for tamper reset type events
Enter + 912 + ZZ + Enter
ZZ = zone from 01 to 64
» Enable/Disable Contact-ID code for deactivation events by users
Enter + 903 + NU + Enter
NU = user number from 01 to 97
» Enable/Disable Contact-ID code for activation events by users
» Enter + 913 + NU + Enter
NU = user number from 01 to 97
» Enable/Disable Contact-ID code for system events of opening type
» Enter + 904 + II + Enter
II = system event index from 00 to 26
Opening type events
System events
Index Internal event Default code
00 Low battery in wireless device 384
01 N/A
02 Supervision failure 147
03 Zone bypass 570
05 AC network failure 301
06 Low system battery 302
07 Absent battery 311
08 N/A N/A
09 Remote deactivation 404
10 Automatic deactivation 403
11 N/A
12 N/A
13 System reset 305
14 Programming change 306
15 Failure in event communication 354
16 Wrong password 461
17 Remote access 410
18 Manual test 601
19 Periodic test 602
20 Event buffer reset 621
21 Restart date and time 625
22 Tampering of expander devices / Tamper resetting of expander devices 145
23 Tamper sensors /Tamper sensor resetting 383
24 Maintenance request 616
25 AC failure of the wireless device 342
26 PGM actuation 422