User Guide

15
» Program DNS servers for Ethernet
Enter + 815 + S + Enter, where S = 1 or 2 (Server 1 or Server 2) .
After the command, type the DNS1 server number and press the Enter key to conrm.
3.3. Remote update
To download/check out a new version
Enter + 9922 + Enter.
If there is a version available for download, the message Download Wait will appear and the download will start, which
will take between 3 and 5 minutes (depending on the network). If the center does not have a version to download, the
message Download failed will appear.
Install the download version
Enter + 9933 + Enter.
The newly downloaded version will be installed and the records and programming of the center will not be lost. To check
the software version of the center, access the Menu and using the arrow keys access the Version of the center to display it.
Note : the center must be connected to the Ethernet. It is not possible to download/update the software through the GPRS
connection due to the download speed of the connection and the excessive consumption of the packet used.
3.4. Passwords
Password programming 1 (exclusive programming for the programmer user)
» Change passwords for users of positions 98 and 99
Enter + 20 + NU + PASSWORD + Enter.
NU = user number 98 or 99.
PASSWORD = password to be programmed containing 4 or 6 digits.
» Delete the user’s password from position 98
Enter + 20 + 98 + Enter.
1
The password for position 99 cannot be deleted.
Password programming 2 (exclusive programming for the master user)
» Change/create passwords for users in positions 00 to 97.
Enter + 20 + NU + PASSWORD + Enter.
NU = user number from 00 to 97.
PASSWORD = 4 or 6 digit password to be programmed.
» Delete password for users in positions 01 to 97
Enter + 20 + NU + Enter.
NU = user number from 01 to 97.
1
The password for position 00 cannot be deleted.
Password permissions
» Dene permission for password partitioning
Enter + 21 + NU + GP + Enter.
NU = n user number from 01 to 96.
GP = group of partitions, with partitions 01 to 10 in group 0 and partitions 11 to 16 in group 1.
» Dene permission only for activation or permission for
bypassing
Enter + 2 + P + GS + Enter + Select password + Enter.
P = permission setting, 5 active only and 6 bypass permission.
GS = group of passwords from 0 to 9, with group 0 going from 01 to 10, group 1 from 11 to 20 and so on closing with
group 9 from 91 to 97.