User Guide

10
40
Atv/Dtv partial mode only for Partition 10
41
Atv/Dtv partial mode only for Partition 11
42
Atv/Dtv partial mode only for Partition 12
43
Atv/Dtv partial mode only for Partition 13
44
Atv/Dtv partial mode only for Partition 14
45
Atv/Dtv partial mode only for Partition 15
46
Atv/Dtv partial mode only for Partition 16
51 PGM 01
52 PGM 02
53 PGM 03
54 PGM 04
55 PGM 05
56 PGM 06
57 PGM 07
58 PGM 08
59 PGM 09
60 PGM 10
61 PGM 11
62 PGM 12
63 PGM 13
64 PGM 14
65 PGM 15
66 PGM 16
Wireless sensors
» Register wireless sensors
Enter + 61 + ZZ + Enter + Actuate the sensor by pressing the synchronization key.
ZZ = zone to which the sensor will be linked from 01 to 64.
» Delete wireless sensors
Enter + 71 + ZZ + Enter.
ZZ = zone to which the sensor will be linked from 01 to 64.
» Adjustment of the wireless infrared sensors
Enter + 66 + ZZ + S + L + M + Enter.
Z = zone from 01 to 64.
S = Sensitivity from 0 to 3, where 0 = minimum sens. / 1 = normal sens. / 2 = intermediate sens. / 3 = maximum sens.
L = Sensor LED, where 0 = Off / 1 = On.
M = Sensor operating mode, where 0 = Economical / 1 = Continuous.
Note: for the XAS 8000 and TX 8000 the Sensitivity, Sensor LED and Operation mode settings are allowed by the center,
but only the LED setting is accepted by the XAS 8000 and TX 8000 .
» Wireless sensor test
Enter + 52 + Enter + Actuate sensor.
» Disable sensor tamper
Enter + 78 + X + Enter.
X = Zone group 0 to 6
» Disable digital tamper of IVP 8000 EX sensor
Enter + 79 + X + Enter.
X = Zone group de 0 a 6