Manualshelf

ITP700 Debug Port Design Guide

ManualsBrandsIntel ManualsOtherIntel Xeon Processor 3.20 GHz, 2M Cache, 533 MHz FSB
51525354555657585960
R
ITP700 Debug Port Design Guide 53
5 ITP700 Flex Mechanical
Requirements
The pinout of the debug port connector at the end of the ITP700 Flex is identical to that of the
standard debug port connector.
The surface mount device is a Molex #52499-001 or equivalent. This connector does not need to
be included on the BOM for production motherboards. It is expected that the connector footprint
be included on the baseboard in a location that will allow the connector to be reworked onto the
board. Note that this surface mount connector is a fine pitch device.
Contact your surface mound device vendor of choice to obtain keepout volumes and footprints of
the Molex connector