Manualshelf

603 Pin Socket Design Guidelines

ManualsBrandsIntel ManualsOtherIntel Xeon Processor 2.00 GHz, 2M Cache, 400 MHz FSB
21222324252627282930
603 Pin Socket Design Guidelines
R
26
6. Validation Testing Requirements
This section of the document outlines the tests that must be successfully completed in order for the
supplier's socket to pass the design guidelines validation. It provides the test plan and procedure
required for validation.
6.1. Applicable Documents:
EIA-364-C.
Intel
Xeon
Processor at 1.40 GHz, 1.50 GHz and 1.70 GHz
1
(datasheet)
Intel
Xeon
Processor Thermal Design Guidelines
1
Note: (note 1) For details on ordering this documentation, visit Intel’s website at http://www.intel.com
or
contact your Intel field sales representative.
6.2. Testing Facility:
Testing will be performed by Intel's designated test facility.
6.3. Funding:
Socket supplier will fund socket validation testing for their socket. Any additional testing that is
required due to design modifications will also be at the expense of the supplier.
6.4. Socket Design Verification:
At the earliest possible date, a detailed drawing of the socket supplier's 603 Pin Socket must be provided to
Intel for review. This drawing should include all of the features called out in this design guideline (marking,
pinout, cam location, date code location and explanation, etc.) as well as dimensional and board layout
information. This drawing will be used to confirm compliance to this design guideline.
6.5. Reporting:
Test reports of the socket validation testing will be provided directly from the independent test facility
to Intel. Intel will also be given access to contact the test facility directly to obtain socket validation
status, explanation of test results and recommendations based on the test results.
6.6. Process Changes:
Any significant change to the Socket will require submission of a detailed explanation of the change at
least 60 days prior to the planned implementation. Intel will review the modification and establish the
necessary re-validation procedure that the socket must pass. Any testing that is required MUST be
completed before the change is implemented.