64-bit Intel Xeon Processor with 2MB L2 Cache Thermal/Mechanical Design Guidelines

Enabled Suppliers Information
68 64-bit Intel® Xeon™ Processor with 2MB L2 Cache Thermal/Mechanical Design Guidelines
D.1.2 Additional Suppliers
As mentioned in Appendix E.1.1, the Intel 64-bit Intel Xeon Processor with 2MB L2 Cache
Reference Design (CEK604-1U-02) was optimized for thermal performance to meet Thermal
Profile B in 1U rack optimized servers. Similar optimizations can be achieved with heatsinks
designs from multiple suppliers of Intel Xeon processor with 800 MHz System Bus heatsinks.
Two suppliers have submitted samples and thermal test results demonstrating designs that meet the
64-bit Intel Xeon Processor with 2MB L2 Cache thermal performance requirements. Intel has
performed limited thermal testing to confirm that the solutions meet thermal performance
requirements. The solutions have not been thoroughly tested by Intel, and may or may not meet the
64-bit Intel Xeon Processor with 2MB L2 Cache enabling solution mechanical performance and
quality and reliability requirements. Customers should contact the suppliers for further information
on enabling solution performance, quality, and reliability. This supplier list has been summarized in
Table E-2.
§
Table D-2. Processor Enabling Solutions – Additional Suppliers
Assembly Component Description Development Suppliers Supplier Contact Info
CEK604-1U-02
(for 1U)
CEK Heatsink Copper Fin,
Copper Base
Aavid Thermalloy*
CNDA 36187
(stacked fin)
Heat Technology, Inc.*
CNDA
(folded fin)
Scott Martineau
603-223-1710
[e-mail]
Gil Dillon
[phone]
[e-mail]