ITP700 Debug Port Design Guide

R
ITP700 Debug Port Design Guide
97
RMT6 M7 GNDREF 250
RMT7 M8 GNDREF 250
RMT8 M9 GNDREF 250
RMT9 M10 GNDREF 250
RMT10 M11 GNDREF 250
RMT11 M12 GNDREF 250
RMT12 M13 GNDREF 250
RMT13 M14 GNDREF 250
RMT14 M15 GNDREF 250
RMT15 M16 GNDREF 250
* Include Minitek* connector model.
X3 M1 M2 M3 M4 M5 M6 M7 M8 M9 M10 M11 M12 M13 M14 M15 M16 MINITEK*
.ENDS DBADBR
***************************************************
* BPM5DR
* BPM[5] DRIVE MODEL LEVEL 1
* UPDATED: NOVEMBER 18 1999
*
* DRIVE BPM5DR TO GROUND WHEN ACTIVE
*
* PINS:
* GNDREF=GR0UND
* M2=MINITEK* CONNECTOR AT TARGET
*
* ADDITIONAL REQUIRED SUBCIRCUITS INCLUDED IN ITP700_PACKAGES.TXT:
* QSOP = QSOP PIN MODEL, PACKAGE APPROXIMATION
* MINITEK* = ITP DPA HEADER MODEL
*