ITP700 Debug Port Design Guide

R
102 ITP700 Debug Port Design Guide
RP11C GNDREF ECLN 5600
RP11D GNDREF ECLN 5600
R21 ECLN ECLP 100
* Setup of Minitek* connector nodes
* Minitek* pad capacitance
CMT1 M1 GNDREF 5.00E-13
CMT2 M2 GNDREF 5.00E-13
CMT3 M3 GNDREF 5.00E-13
CMT4 M4 GNDREF 5.00E-13
* Tie all other Minitek* Model Pins to Ground
RMT4 M5 GNDREF 250
RMT5 M6 GNDREF 250
RMT6 M7 GNDREF 250
RMT7 M8 GNDREF 250
RMT8 M9 GNDREF 250
RMT9 M10 GNDREF 250
RMT10 M11 GNDREF 250
RMT11 M12 GNDREF 250
RMT12 M13 GNDREF 250
RMT13 M14 GNDREF 250
RMT14 M15 GNDREF 250
RMT15 M16 GNDREF 250
* Include the model of the Minitek* connector
X5 M1 M2 M3 M4 M5 M6 M7 M8 M9 M10 M11 M12 M13 M14 M15 M16 MINITEK*
.ENDS BCK
***************************************************
* BPMRESET
* TDO,BPM[5..O]n, AND RESETn LOAD MODEL LEVEL 1