Datasheet

DRAM Controller Registers (D0:F0)
80 Datasheet
5.1.19 PAM2—Programmable Attribute Map 2
B/D/F/Type: 0/0/0/PCI
Address Offset: 92h
Default Value: 00h
Access: RO, RW/L
Size: 8 bits
This register controls the read, write, and shadowing attributes of the BIOS areas from
0C8000h– 0CFFFFh.
Bit Access
Default
Value
Description
7:6 RO 00b Reserved
5:4 RW/L 00b
0CC000h–0CFFFFh Attribute (HIENABLE):
00 = DRAM Disabled: Accesses are directed to DMI.
01 = Read Only: All reads are serviced by DRAM. All writes are forwarded to
DMI.
10 =: Write Only: All writes are sent to DRAM. Reads are serviced by DMI.
11 = Normal DRAM Operation: All reads and writes are serviced by DRAM.
This register is locked by Intel TXT.
3:2 RO 00b Reserved
1:0 RW/L 00b
0C8000h–0CBFFFh Attribute (LOENABLE): This field controls the steering of
read and write cycles that address the BIOS area from 0C8000h to 0CBFFFh.
00 = DRAM Disabled: Accesses are directed to DMI.
01 = Read Only: All reads are serviced by DRAM. All writes are forwarded to
DMI.
10 = Write Only: All writes are sent to DRAM. Reads are serviced by DMI.
11 = Normal DRAM Operation: All reads and writes are serviced by DRAM.
This register is locked by Intel TXT.