User Guide
Table Of Contents
- Intel® Ethernet Adapters and Devices User Guide
- Overview
- Installing the Adapter
- Microsoft* Windows* Installation and Configuration
- Intel Network Drivers for DOS
- Data Center Bridging (DCB) for Intel® Network Connections
- Remote Boot
- Troubleshooting
- Known Issues
- Regulatory Compliance Statements
- FCC Class A Products
- FCC Class B Products
- Safety Compliance
- EMC Compliance – The following standards may apply:
- Regulatory Compliance Markings
- FCC Class A User Information
- FCC Class B User Information
- EU WEEE Logo
- Manufacturer Declaration European Community
- China RoHS Declaration
- Class 1 Laser Products
- End-of-Life / Product Recycling
- Customer Support
- Legal Disclaimers
8. Click the checkbox of any adapter you want to include in the team, then click Next.
9. Select a teaming mode, then click Next.
10. Click Finish.
The Team Properties window appears, showing team properties and settings.
Once a team has been created, it appears in the Network Adapters category in the Computer Management
window as a virtual adapter. The team name also precedes the adapter name of any adapter that is a member
of the team.
NOTE: If you want to set up VLANs on a team, you must first create the team.
Adding or Removing an Adapter from an Existing Team
NOTE: A team member should be removed from the team with link down.
1. Open the Team Properties dialog box by double-clicking on a team listing in the Computer Man-
agement window.
2. Click the Settings tab.
3. Click Modify Team, then click the Adapters tab.
4. Select the adapters that will be members of the team.
l Click the checkbox of any adapter that you want to add to the team.
l Clear the checkbox of any adapter that you want to remove from the team.
5. Click OK.
Renaming a Team
1. Open the Team Properties dialog box by double-clicking on a team listing in the Computer Man-
agement window.
2. Click the Settings tab.
3. Click Modify Team, then click the Name tab.
4. Type a new team name, then click OK.
Removing a Team
1. Open the Team Properties dialog box by double-clicking on a team listing in the Computer Man-
agement window.
2. Click the Settings tab.
3. Select the team you want to remove, then click Remove Team.
4. Click Yes when prompted.
NOTE: If you defined a VLAN or QoS Prioritization on an adapter joining a team, you may have to
redefine it when it is returned to a stand-alone mode.