User Guide
Table Of Contents
- Intel® Ethernet Adapters and Devices User Guide
- Overview
- Installing the Adapter
- Microsoft* Windows* Installation and Configuration
- Intel Network Drivers for DOS
- Data Center Bridging (DCB) for Intel® Network Connections
- Remote Boot
- Troubleshooting
- Known Issues
- Regulatory Compliance Statements
- FCC Class A Products
- FCC Class B Products
- Safety Compliance
- EMC Compliance – The following standards may apply:
- Regulatory Compliance Markings
- FCC Class A User Information
- FCC Class B User Information
- EU WEEE Logo
- Manufacturer Declaration European Community
- China RoHS Declaration
- Class 1 Laser Products
- End-of-Life / Product Recycling
- Customer Support
- Legal Disclaimers
China RoHS Declaration
Class 1 Laser Products
Server adapters listed above may contain laser devices for communication use. These devices are compliant
with the requirements for Class 1 Laser Products and are safe in the intended use. In normal operation the
output of these laser devices does not exceed the exposure limit of the eye and cannot cause harm.
For continued safe operation in case of an abnormal circumstance, always have the provided laser connector
cover in place or a compatible fiber optics cable properly connected when power is available to the product.
The Laser device must be factory serviced ONLY by the responsible manufacturer! NO adjustments, service
or maintenance is to be performed otherwise.
CAUTION: Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
These Class 1 Laser devices:
Comply with FDA/CDRH per CFR21, subchapter J.
Comply with IEC 60825-1:2007
End-of-Life / Product Recycling
Product recycling and end-of-life take-back systems and requirements vary by country.
Contact the retailer or distributor of this product for information about product recycling and/or take-back.