User's Manual

Chapter 4 – Using Advanced Configuration Options
Copyright
©
2002 Intel Corporation
88
Step-by-step To specify or change the IP address of the gateway or to
enable/disable the gateway’s DHCP control:
1 Click the Advanced menu to expand its selections.
2 Click LAN Settings.
The following appears.
To specify or change the gateway’s IP address:
1 Enter (or change) the LAN IP Address in the LAN IP
Settings field.
2 Enter your Subnet Mask in the Subnet Mask field.
3 Click Apply to save your settings.
To enable or disable the gateway’s DHCP control:
1 Select the Enable DHCP Server Functions
checkbox if you are using the gateway to
automatically assign IP addresses to the computers
on your network (or deselect this checkbox to disable
the gateway’s DHCP control).
2 Enter a starting address in the Starting Address
field.