User's Manual

Chapter 3 – Setting up the Gateway with a Network
Copyright
©
2002 Intel Corporation
46
Entering a key manually
If you are not using Intel
®
AnyPoint
®
network adapters
you can manually enter a key, either as a series of 40/64
bit or 104/128-bit hexadecimal digits (characters 0
through 9 and A through E) or as 40/64 bit or 104/128-bit
ASCII characters (any character).
Related topics •See Specifying a wireless network name (SSID) on
page 37.
•See Correcting for wireless interference on page 39.
•See Changing or disabling encryption settings on
page 42.
•See Specifying a wireless encryption key from text on
page 44.
•See Disabling wireless encryption on page 49.
Step-by-step To enter a key manually:
1 Click the Settings menu to expand its selections.
2 Click Wireless to view your current wireless settings,
then click the Wireless Setup button to enter the
Wireless Setup Wizard.
3 Click Next until you see the “Encryption” screen.