User's Manual

Chapter 2 – Configuring your DSL Settings
Copyright
©
2002 Intel Corporation
23
3 Click Configure DSL settings manually then click
Next until you see the following screen.
4 Select one of the following methods your ISP uses to
assign an address to your Internet connection.
• Server assigned IP address (dynamic) –
Select this option if your ISP assigns addresses
dynamically.
• Specify an IP address (static) – Select this
option if your ISP assigns addresses statically. If
you select this option then you must enter the IP
Address, Subnet Mask, and Default Gateway
information in the fields provided.
More about Each computer or networked device on the Internet is
identified by a unique IP address. Your gateway must be
identified by the correct address in order for you to
access the Internet.
Your ISP uses one of two methods to assign an IP
address to you:
• Dynamic (also called server-assigned, automatic, or
DHCP). If your ISP assigns IP addresses
dynamically, your gateway receives an IP address
from a pool of IP addresses when you connect to