User's Manual

Chapter 2 – Configuring your DSL Settings
Copyright
©
2002 Intel Corporation
15
3 Click Configure DSL settings manually then click
Next.
The following appears.
4 Enter the VPI information in the VPI field.
5 Enter the VCI information in the VCI field.
6 Click Next.
More about VPI
Virtual Path Identifier. This is part of the PVC. This,
combined with the VCI, establishes your “channel”
through the phone company equipment. Acceptable
values are: 0-255.
VCI
Virtual Circuit Identifier. This number is part of the PVC. It
establishes your “channel” through the telephone
company equipment. Acceptable values are: 0-65,535.