User's Manual

Chapter 7 – Regulatory Compliance Statements
Copyright
©
2002 Intel Corporation
138
Intel encourages its customers to recycle its products and
their components (e.g. batteries, circuit boards, plastic
enclosures, etc.) whenever possible. In the U.S., a list of
recyclers in your area can be found at: http://
www.eiae.org. In the absence of a viable recycling
option, products and their components must be disposed
of in accordance with all applicable local environmental
regulations.
Disassembly
Instructions
This section is provided to aid in the disassembly and
recycling of this Intel product. Only technically qualified
persons should disassemble this product. Notice, no
user serviceable parts inside.
Tools needed:
• small flathead screwdriver.
• small phillips head screwdriver.
Disassembly steps:
1 Remove the label located at the bottom of the unit –
to access the single phillips head screw.
2 Remove the single phillips head screw located at the
bottom of the unit.
3 Locate two slots on the right-side of the unit.
4 By inserting a small flathead screwdriver first into one
of the slots then the other, slowly pry the top cover off
the unit.
5 Lift circuit boards and components from plastic
enclosure.
6 You can now recycle the plastic case as well as the
internal circuit boards.