User's Manual

Chapter 7 – Regulatory Compliance Statements

2002 Intel Corporation

133

interference by one or more of the following

measures:

• Change the direction of the radio or TV antenna.

• To the extent possible, relocate the radio, TV, or

other receiver away from the product.

• Plug the host computer into a different electrical

outlet so that the computer and the radio or TV

are on different electrical branch circuits.

• This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation.

• CAUTION: If you make any modification to the

equipment not expressly approved by Intel

, you

could void your authority to operate the equipment.

RF exposure compliance statements

Notice: Install or position the Intel AnyPoint

DSL

Gateway Model 4400 so that the antenna is at least 8

inches (20 cm.) from the user or other persons. Failure to

locate the antenna at this minimum distance may result in

exceeding the FCC limits for human exposure to RF

(radio frequency) energy. Also, do not operate in

conjunction with any other antenna or transmitters.

Telecom compliance statements

• This equipment complies with Part 68 of the FCC

Rules and the requirements adopted by ACTA. On

the bottom side of this equipment is a label that

contains, among other information, a product

identifier in the format US: EJMDLNANXXXX. If