User's Manual

Chapter 1 – Introduction
Copyright
©
2002 Intel Corporation
7
Back panel
connectors
The Intel Gateway’s back panel includes the cable
connectors and Reset button.
Wireless Off - There are no wireless devices
communicating with the gateway.
Green solid - at least one wireless device is
connected to the gateway.
Green blinking - traffic is being passed
between at least one wireless device and the
gateway.
Ethernet
1-4
Off - no PC is connected to any of the four
Ethernet ports.
Green solid - A valid link has been established
at 10Mbps.
Green blinking - traffic is being passed at
10Mbps.
Yellow solid - A valid link has been established
at 100Mbps.
Yellow blinking - traffic is being passed at
100Mbps.
Power Accepts the cylinder end of the power cable.
Plug the other end of the power cable into a
standard electrical outlet. (It is recommended
that you use a surge protector.) See the Power
light on the front panel in the previous section.
Ethernet Accept RJ-45 Ethernet-style connectors for
connecting up to four PCs to the gateway’s 4-
port switch.
Power
12V/1.2A
Ethernet
DSL
Reset
4321