User's Manual

Chapter 5 – Diagnostics and Troubleshooting
©
2002 Intel Corporation
109
This assumes that the Gateway DHCP is still on – which
it is on by default, when in gateway mode.
• The adapter is set to obtain an IP address
automatically
You can verify the PC adapter is set correctly by
going to a MSDOS or command prompt. At the
command prompt type:
ipconfig /all
(leave a space before /all)
• Verify the default Gateway address is
192.168.0.254. If the IP address is correct, but
the Welcome screen still doesn’t come up, then
restart your PC.
• In your Web browser, specify to not use a proxy
server when connecting to the Internet (refer to
your browser’s help pages for information).
• The adapter is set to obtain a DNS address
automatically for Windows 2000
• The adapter has DNS disabled for Windows 98,
Windows 98SE, or Windows ME.
Solution B Wireless Network
• Follow the above solutions for a wired network
• Verify that there is a wireless client connected – the
gateway’s Wireless Link LED (third from the right in
the bank of eight LEDs) will blink green when it
detects traffic.
• Verify that your wireless adapter is set to operate in
Infrastructure mode and uses the same Network ID
(SSID) code and encryption settings as the gateway.
Problem I can’t share files and printers among the PCs on my
network