User's Manual

Chapter 1 – Introduction
Copyright
©
2002 Intel Corporation
5
A look at the Gateway Hardware
Front Panel The Intel Gateway’s front panel has a series of eight
lights (plus a power on indicator) that provide information
about the gateway’s operational status.
Power Normally this light is on. If it is not on, check
that the power cable connectors are securely in
place.
System Green blinking - The gateway is operating
correctly.
Yellow blinking - The gateway is operating
correctly but has detected another DHCP
server connected to one of the four Ethernet
connectors. Disconnect each Ethernet cable,
one at a time, until the system returns to green
blinking. Change the PC you've identified as a
DHCP server to a DHCP client. (See the
Troubleshooting chapter for instructions.)
If this LED is not blinking, the system is not
operating correctly. See Chapter 5 for
troubleshooting information.
AnyPoint
®
Gateway
Ethernet
WirelessSecurityInternetSystem
Power
123
4