User's Manual

Chapter 5 – Diagnostics and Troubleshooting
Copyright
©
2002 Intel Corporation
92
Transmission Rate Description: Indicates the transmission
rate currently in use. You should never
need to change this value. However, it
may be possible for you to extend the
wireless communication distance by
decreasing this value. To do so, click
Settings>Wireless, click the Wireless
Setup button, click Next until you see the
"Network Name" screen, then click
Advanced. Click its Help button for more
information.
Default: Automatic
WAN IP Address Description: The IP address is the
address of the Internet Interface. This is
the address that allows external traffic
(data) to reach your local network. This
information is provided to you by your
ISP.
Default: Provided by ISP
Default Gateway IP Address Description: Indicates the IP address of
the device on your ISP’s network used to
route traffic to the Internet. The gateway
sends all messages that are not
addressed to devices on your local
network to this location. This information
is provided to you by your ISP.
Default: Provided by ISP
DNS Server IP address Description: The DNS Servers translate
a numeric IP address into a human-
readable address. For example,
192.168.0.254 is a numeric IP address,
and www.intel.com is a human-readable
address. These two fields show the IP
address of the DNS Servers at your ISP's
site. This information is provided to you
by your ISP.
Default: Provided by ISP