User's Manual

Chapter 3 – Setting up the Gateway with a Network
Copyright
©
2002 Intel Corporation
37
4 Click the Enter a key manually option.
Your screen will look similar to the following.
5 Select either Hexadecimal digits or ASCII
Characters from the Key Format list box.
6 Select either 40 Bit/64 Bit or 104 Bit/128 Bit from
the Encryption Level list box.
7 Click a Key option, then enter a unique 10
hexadecimal digit (2 pairs of 5-digits) string in its
associated field. The four Key options allow you to
specify four different keys that you can select at any
time.
More about A 40/64-bit key can consist of 10 hexadecimal digits or 5
ASCII characters:
• Example Hex Key: 1AC78 24DE5
• Example ASCII Key: JimBo
Note You can only use one encryption key at a time.
Having four sets of keys allows you to quickly
change your encryption, if necessary.