User's Manual

Chapter 7 – Regulatory Compliance Statements
Copyright
©
2002 Intel Corporation
124
• small phillips head screwdriver.
Disassembly steps:
1 Remove the label located at the bottom of the unit –
to access the single phillips head screw.
2 Remove the single phillips head screw located at the
bottom of the unit.
3 Locate two slots on the right-side of the unit.
4 By inserting a small flathead screwdriver first into one
of the slots then the other, slowly pry the top cover off
the unit.
5 Lift circuit boards and components from plastic
enclosure.
6 You can now recycle the plastic case as well as the
internal circuit boards.